# Shank: Prongs Settings

### **Step 1: Prongs Settings**

In the "Prong Settings" section, activate the third option (scalloped) and the "Boolean" mode.

<img src="https://www.rhinoartisan.com/wp-content/uploads/2024/07/Group-15-1.png" alt="" height="342" width="463">

### **Step 2: Cutters**

Adjust the cutter Start width to 0.8 millimeters.

<img src="https://www.rhinoartisan.com/wp-content/uploads/2024/07/Group-16.png" alt="" height="391" width="466">

### **Step 3: V-Cutters and Drill**

Activate the "V-Prongs" mode. In the drill options, change the width of the Drill to 2 millimeters.

<div><img src="https://www.rhinoartisan.com/wp-content/uploads/2024/07/Group-18-1.png" alt="" height="363" width="445"> <img src="https://www.rhinoartisan.com/wp-content/uploads/2024/07/Group-17-1.png" alt="" height="316" width="444"></div>

### **Video Lesson**

{% embed url="<https://www.rhinoartisan.com/wp-content/uploads/2024/07/L7.mp4>" %}

**Next Step:** Finalize the halo prongs.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.rhinoartisan.com/tutorials/crafting-engagement-masterpieces/halo-cathedral-ring/shank-prongs-settings.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.