# Shank

In this lesson, we will focus on designing the shank, the foundational band of your ring.

### **Step 1: Shank Commnad**

Go to the "Shanks" tab (1) and select the "Classic" command (2).

![](https://3375153115-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5uhW8FwQpXQj8tHUULMo%2Fuploads%2FAkUp9awAso9foxYhzGoC%2FShank_classic.png?alt=media\&token=ccda4642-be6c-44fb-9f8f-6d46c3716fcf)

### **Step 2: Classic Library**

From the RhinoArtisan library, choose the model "CL001" **(1)**, then click on Edit **(2)**.

![](https://www.rhinoartisan.com/wp-content/uploads/2024/07/Lesson-1-Shank2.jpg)

TIP: Use the shaded mode for better visualization of the model. Change it in the right corner of each viewport. **(1)Wireframe - (2) Shaded**

<figure><img src="https://www.rhinoartisan.com/wp-content/uploads/2024/07/Group-17.jpg" alt=""><figcaption></figcaption></figure>

### **Step 3: Shank Parameters**

Adjust the parameters of the model by changing the **Height** to 1.5 millimeters.

![](https://www.rhinoartisan.com/wp-content/uploads/2024/07/Lesson-1-Shank3-445x1024.jpg)

**Step 4:** Click "Accept" to finalize the shank design.

![](https://www.rhinoartisan.com/wp-content/uploads/2024/07/Group-13.jpg)

<figure><img src="https://3375153115-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5uhW8FwQpXQj8tHUULMo%2Fuploads%2F7uj9PwD4tuZ8pR4VYVnB%2FClassicKickstart.png?alt=media&#x26;token=03a2ace4-1093-4c67-b651-9a230f6baf71" alt=""><figcaption></figcaption></figure>

&#x20;

**Video Lesson**

{% embed url="<https://www.rhinoartisan.com/wp-content/uploads/2024/07/SHANK1.mp4>" %}

#### Next Step

In the next lesson, we will create the curve socket for our gemstone.