The Microsetting command is designed to create all the necessary cutters required for a microsetting, specifically for use in a subsequent Boolean Difference operation. This command helps you prepare precise gaps in the base object where gemstones will later be set.
This tool is ideal for crafting traditional micro settings and working with complex designs. It allows for the creation of cutters that match the shape and placement of the gems you plan to use, ensuring accuracy and efficiency during the setting process.
Cutters
The main cutter for the gemstones is controlled in this panel. You can choose between different cutter shapes and adjust parameters like height and width. The width can be tapered independently for each side, making it easier to account for curved surfaces where one side needs to be thicker than the other.
Height: Adjusts the height of the cutter.
Widht: Adjusts the width of the cutter
Lenght: Adjusts the lenght of the cutter
Move in Z: Allows you to adjust the height of the cutter along the Z-axis.
Move Middle in Z: Allows you to adjust the height of the cutter along the Z-axis, of the middle part.
Shape: You can customize the shape of the cutter.
U Shape
V Shape
Square Shape
Trapezoidal Shape
French
Mode: Allows you to modify both sides at the same time or to modify each side independently.
Shape Scale: Allows to set the proportion of the shape in proportion to the total cutter.
V Prongs
This panel allows you to create V-shaped cutters between stones. While some setters prefer to add these cuts manually, this feature automates the process, giving you full customization of the V-prong cuts to match the design.
Height: Adjusts the height of the V prong.
Widht: Adjusts the width of the V prong
Lenght: Adjusts the lenght of the V prong
Move in Z: Allows you to adjust the height of the V prong along the Z-axis.
Mode: Allows you to modify both sides at the same time or to modify each side independently.
V Channel
Similar to the Cutters panel, this section allows you to shape the V-channel between the stones. You can choose between flat or round ends, and even extend the ends if required.
Height: Adjusts the height of the cutter.
Widht: Adjusts the width of the cutter
Move in Z: Allows you to adjust the height of the V prong along the Z-axis.
Prongs In A Row
This optional panel lets you reinforce the space between the stones with prong-shaped cutters. Activating this panel displays an orange sphere, which you can drag to position the prong cutters precisely, ensuring they are well-aligned with your design.
Once the cutters are generated, they can be used in a Boolean Difference operation to carve out the appropriate spaces in the object where the gemstones will be set.
Last updated
